4. Saab 9-5 Wiring diagram The table refers to the 7-pin connector for the towing hitch. 1 Left-hand direction indicator 2 Rear fog light (on/off) 3 Ground 4 Right-hand direction indicators 5 Right-hand rear light 6 Brake lights 7 Left-hand rear light 7 6 5 4 2 YE/WH 1.0 PK/WH 1.0 1.0 YE/BK 1.0 BU 1.0 YE/RD GN 1.0 1 3 BK 2.0 258 10 9 8 7 6 5 4 3 1 2 7 6 5 4 3 2 1 M4805081 990604

2. 2 4805081 Saab 9-5 Starting point: rear bumper removed. 1 Remove the rubber plug from the rear bumper abutment. 2 Run the kit’s wiring harness into the luggage compartment. 3 Connect the towing hitch wiring harness to the pre-installed towing hitch wiring in the car. 4 Use a 5.0 mm diam. bit to drill a hole in the righthand reinforcement plate, as shown. 5 Scrape away the paint from around the drill hole and screw on the ground cable on the wiring harness with a plate screw. 6Checkthefunctionoftheoutlet,seewiring diagram. E371A002 5 4 3

3. 48 05 081 3 Saab 9-5 7 Fit the trailer connector (see seperate fitting instructions) and the bumper. 8 Mount the connector on the bracket so that the cover opens to the left. 9 Adjust the wiring harness between the connector and the rear bumper abutment. 10 Fit the wiring harness ́s rubber grommet in the rear bumper abutment ́s lead-through hole. 11 Use the cable ties to secure the wiring harness. E371A008 8

1. Saab 9-5 9-5 Monteringsanvisning SCdefault MONTERINGSANVISNING · INSTALLATION INSTRUCTIONS MONTAGEANLEITUNG · INSTALLATIONS DE MONTAGE SITdefault Saab 9-5 Wiring harness, 7-core 1 Trailer connector, 7-pin 2Screw(3) 3Nut(3) 4 Self-tapping screw 5 Cable tie (3) Accessories Part No. Group Date Instruction Part No. Replaces 400 106 274 3:71-21 June 98 48 05 081 48 05 081 Sep 96 E371A001 1 5 4 3 2